Return to Human Space Flight home page

Preflight Videos:

Get RealPlayer G2    Get MS Media Player

Get QuickTime Player

 This video animation shows the International Space Station in three configurations -- in its pre-STS-113 configuration, with the addition of the P1 (P-One) Truss and at completion. P1 will be delivered by Space Shuttle Endeavour and installed on the International Space Station during STS-113. (no audio)
MPEG Video Format (4.3 M)
 This video animation shows the layout of Space Shuttle Endeavour's payload bay at the launch of STS-113, including the P1 (P-One) Truss Segment, the Remote Manipulator System and MEMS-based PICOSAT Inspector (MEPSI) experiment. MEMS stands for Microelectromechanical Systems. (no audio)
MPEG Video Format (6.0 M)
 This video is an animated diagram of the P1 (P-One) Truss Segment showing the Ammonia Tank Assembly, the Active Thermal Control System Radiators and the Radiator Beam Valve Modules. P1 will be delivered by Space Shuttle Endeavour and installed on the International Space Station during STS-113. (no audio)
MPEG Video Format (1.3 M)
 This video is an animation depicting the P1 (P-One) Truss Radiator Beam Assembly, Thermal Radiator Rotary Joint and Torque Box Assembly. The P1 Truss is to be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (2.8 M)
 This video is an animation depicting the location of items on the P1 (P-One) Truss, which will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. Items shown include Utility Carrier Trays, Multi-Layer Insulation and electrical connectors. (no audio)
MPEG Video Format (3.8 M)
 This video is an animation depicting the location of items on the P1 (P-One) Truss, which will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. Items shown include the Nitrogen Tank, Pump Module Assembly and Thermal Radiator Rotary Joint. Also shown in the video are the stowage and deployment locations of the UHF Antenna, the Wireless Video System External Transceiver Assemblies (WETA) Support Assembly and the Keel Pin and Drag Link Assembly. The video also shows the location of the Keel Pin Assembly at launch. (no audio)
MPEG Video Format (12.1 M)
 This video is an animated demonstration of the Crew and Equipment Translation Aid, or CETA cart, as it moves along the rails of the P1 (P-One) Truss. The CETA cart and P1 will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (2.5 M)
 This beginning of this video is an animation showing the location of the Wireless Video System External Transceiver Assembly on the end of the P1 (P-One) Truss. The P1 will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. The video then shows the mechanisms that will be used to connect the P1 to the S0 (S-Zero) Truss, including the Capture Bar on the P1 and the Capture Claw on the S0. (no audio)
MPEG Video Format (10.5 M)
 This video shows Space Shuttle Endeavour's rendezvous and docking with the International Space Station during STS-113. (no audio)
MPEG Video Format (4.5 M)
 This video is an animation depicting the addition of the P1 (P-One) Truss to the International Space Station during STS-113. Space Shuttle Endeavour's robot arm will remove the truss from the shuttle's payload bay and hand it off to the station's Canadarm2 robotic arm, which will then maneuver the truss into position for attachment to the S0 (S-Zero) Truss. (no audio)
MPEG Video Format (8.7 M)
 This video is an animated demonstration of a spacewalking astronaut moving along the International Space Station's P1 (P-One) Truss with the aid of the Crew and Equipment Translation Aid, or CETA cart. Both the P1 and the CETA cart will be delivered to the station by Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (4.0 M)
 This video shows a spacewalking astronaut on the end of the International Space Station's Canadarm2 robotic arm holding the Crew and Equipment Translation Aid, or CETA cart, as he is moved from the P1 (P-One) Truss to the S1 (S-One) Truss. The CETA cart will be delivered to the station attached to the P1, but it will be moved to its permanent home on the S1 during the spacewalk. Both the P1 and the CETA cart will be delivered to the station by Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (3.7 M)
 This video shows a spacewalking astronaut on the end of the International Space Station's Canadarm2 robotic arm holding the Crew and Equipment Translation Aid, or CETA cart. He attaches it to the rails of the S1 (S-One) Truss. The second half of the video shows the Mobile Transporter, or MT, moving down the rails of the P1 (P-One) Truss. A crewmember inside the station maneuvers Canadarm2 to attach its end effector to the MT. The CETA cart, along with the P1 (P-One) Truss, will be delivered to the station by Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (3.8 M)
 This video shows a spacewalking astronaut on the end of the International Space Station's Canadarm2 robotic arm, being moved to a worksite on the station's P1 (P-One) Truss, which will be delivered to the station by Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (3.0 M)
 In this video animation, the International Space Station's Canadarm2 robotic arm is maneuvered by remote control to attach an end effector to a grapple fixture on the Destiny Laboratory Module. The other end is then detached from the Mobile Transporter, or MT, on the P1 (P-One) Truss. Space Shuttle Endeavour will deliver the P1 to the station during STS-113. (no audio)
MPEG Video Format (2.5 M)
 In this video animation, the International Space Station's Mobile Transporter, or MT, moves along the rails of the station's Integrated Truss Structure, or ITS. The P1 (P-One) Truss, which is part of the ITS, will be delivered to the station aboard Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (2.3 M)
 This animated video shows the unberthing and departure of Space Shuttle Endeavour from the International Space Station during STS-113. After undocking, Endeavour's astronauts will execute a flyaround of the station to photodocument its growing exterior structure. (no audio)
MPEG Video Format (5.5 M)
 This video is an animation depicting the deployment of the P1 (P-One) Truss segment's radiator. The P1 Truss will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (3.2 M)
 This animated video shows the deployment The P1 (P-One) Truss radiator on the International Space Station. The P1 will be delivered to the International Space Station aboard Space Shuttle Endeavour during STS-113. (no audio)
MPEG Video Format (5.9 M)
 In this animated video, the first of three STS-113 extravehicular activities, or EVAs, is described with a voiceover by STS-113 Lead EVA Officer Dana Weigel. Spacewalkers Michael Lopez-Alegria and John Herrington will perform a variety of tasks in several worksites on the International Space Station's P1 (P-One) Truss, which will be delivered to the station aboard Space Shuttle Endeavour during STS-113.
QuickTime Format
Media Player Format - 28K / 56K
Real Video Format - 28K / 56K
 In this animated video, the second of three STS-113 extravehicular activities, or EVAs, is described with a voiceover by STS-113 Lead EVA Officer Dana Weigel. Spacewalkers Michael Lopez-Alegria and John Herrington will perform a variety of tasks in several worksites on the International Space Station's P1 (P-One) Truss, which will be delivered to the station aboard Space Shuttle Endeavour during STS-113. They will also move a Crew and Equipment Translation Aid, or CETA cart, from the P1 to the S1 (S-One) Truss.
QuickTime Format
Media Player Format - 28K / 56K
Real Video Format - 28K / 56K
 In this video, the last of three STS-113 extravehicular activities, or EVAs, is described with a voiceover by STS-113 Lead EVA Officer Dana Weigel. STS-113 spacewalkers Michael Lopez-Alegria and John Herrington will install Spool Positioning Devices, or SPDs, on the exterior of the International Space Station.
QuickTime Format
Media Player Format - 28K / 56K
Real Video Format - 28K / 56K


Preflight 1 2 3 4 5 6 7 8 9 10 11 12 13 14


Curator: Kim Dismukes | Responsible NASA Official: John Ira Petty | Updated: 12/09/2002
Web Accessibility and Policy Notices